A admin

Dipping Powder Process & Guides

Feb 28, 2016

Please read these steps before performing Nugenesis Dipping Powder!

Step 1: Use an electric nail file with a medium carbide tip, shorten nails to desired length.

Step 2: Use either a fine sandpaper drum or pumice stone remove any excess cuticle and nail shine.

Step 3: Apply NuGenesis Prep Liquid to the entire surface of all 10 nails and air dry.

Step 4: Apply NuGenesis Base Gel to the entire nail surface. Apply using a back-to-forward motion to ensure the nail is evenly covered.

Step 5: Dip nail in desired color and gently tap away any excess powder that remains on the nail. Note: Applying NuGenesis while holding the product at angle ensures even distribution of color.

Step 6: Repeat Step 4 & 5 second coat ensuring even application to all 10 nails.

Step 7: Generously apply NuGenesis Activator Liquid to all 10 nails.

Step 8: Using a nail machine with a fine bit, file around the cuticle area and contour file the nail to shape and remove imperfections.

Step 9: Buff all 10 nails. Have your client thoroughly wash & dry hands before the next step with water only no soap.

Step 10: It is important that you apply NuGenesis Activator Liquid at this time and let air dry for approximately 30 seconds.

Step 11: Apply a light coat of NuGenesis Finish Gel to all 10 nails. Repeat a light second coat and let air dry for approximately 2 minutes.

Step 12: Apply NuGenesis Cuticle Oil to all 10 nails.

Link to share

Use this link to share this article